Stopping the engine – HONDA Accord: Remote Engine Starter System User Manual

Page 16

Advertising
background image

16

5718100S

Stopping the Engine

1.

Push the command button on the transmitter for
1 second or less, then push the stop button within 2
seconds.

2.

The transmitter emits a short beep and sends a
signal to stop the engine. When the engine stops,
the OFF indicator is shown on the display.

NOTE
•

When the RF signal from the
transmitter does not carry to
the receiver, the transmitter
emits three short buzzer
sounds but no indicator is
shown on the display.

•

The engine cannot be stopped
with the transmitter when it was
started using the ignition key.

•

In some cases the remote transmission range can be
longer than the reception range. Therefore the engine
can be started/stopped, and the remote status may
not be displayed.

7336070T

ENGINE-OFF
INDICATOR

STOP
BUTTON

COMMAND
BUTTON

Advertising