Hitachi Koki USA Hi-35pc - Manual (Page 93)

5. "Graphics" Property Sheet
3-25
Pr
o
p
ert
y Sheet
Chapter 3
(9) Halftone
Allows you to select the desired gray-scale dithering method.
• Use Printer’s settings: Uses the settings made on the printer.
• Use settings below
: Set the number of lines per inch and the angle of
pattern. Adjust these settings if Moiré occurs when
printing a fine image such as a photo.
Screen frequency
Set the number of lines for the screen.
Setting value : 1 to 600 (step: 1)
Screen angle
Set the angle for the screen.
Setting value : 1 to 360 (step: 1)
NOTE
Usually, use the default values.
(10) TrueType fonts
• Send TrueType fonts to printer according to the font
: Transmits TrueType fonts according to table
correspondence.
[Edit the table...]: <Only when opened from the
control panel>
Displays a screen on which the system fonts
(Device fonts) are assigned to the PC fonts
(TrueType fonts).
• Always use built-in printer fonts instead of TrueType fonts
: Uses the printer fonts at all times.
• Always use TrueType fonts: Transmits the TrueType fonts at all times.
(11) Special
Specify reversal of toner arrangement between black and white and mirror
image.
• Negative Image: Reverses toner arrangement between black and white.
• Mirror Image : Reverses the image as if the original were viewed in a mirror.
win.book Page 25 Wednesday, January 26, 2000 11:31 AM