Technical data, 232r/rd, 227r/rd – Husqvarna 227R User Manual
Page 30: 235r
30
– English
TECHNICAL DATA
Technical data
Engine
Cylinder capacity, cm
3
Cylinder bore, mm
Stroke length, mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres
Weight
Weight without fuel, cutting tool and
guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A).
Sound power level, guaranteed L
WA
dB(A).
Sound levels
(see note 2)
Equivalent sound pressure level at the
user’s ear, measured according to EN ISO
11806 and ISO 7917, dB(A), dB(A),
min/max:
Vibration levels
Vibration levels on the handles, measured
according to EN ISO 11806 and ISO
7916, m/s
2
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
232R/RD
30,8
35
32
2 700
11 000-11 700
10 000
1,1 kW/8 400 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,5
Walbro WT
0,5
6,5 (RD 6,7)
108
108
90/100
2,5/2,5
3,0/3,5
2,0/2,0
5,1/4,9
227R/RD
26,9
35
28
2 700
11 000-11 700
10 000
1,0 kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,5
Walbro WT
0,5
6,2 (RD 6,4)
108
110
93/99
1,6/2,2
1,8/3,0
2,0/2,7
3,1/6,0
235R
36,3
38
32
2 700
11 000-11 700
10 000
1,3 kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
NGK BPMR7A
0,5
Walbro WT
0,5
7,3
109
110
92/101
2,2/2,7
2,7/4,3
3,5/5,0
4,5/6,2
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates
the highest and lowest values.