Temperature 0°c or colder, Temperature -5°c or colder, Maintenance – Husqvarna 355FX User Manual
Page 33
MAINTENANCE
English
–
33
Temperature 0
°C or colder:
Fit the covers for the starter housing and air filter holder
using the three screws provided as shown in the figure.
Remove the air filter and air filter cover from the machine.
Fit the air filter and air filter cover supplied with the winter
kit.
Temperature -5
°C or colder:
Dismantle the machine’s wear guard, and fit the wear
guard from the winter kit as shown in the figure. Pay
particular attention that the opening on the air duct is
positioned in the centre of the hole in the air filter holder.
IMPORTANT! If the temperature rises above -5
°C or
0
°C respectively the machine MUST be restored to its
normal set-up. Otherwise there is a risk of overheating,
which can cause severe engine damage.
IMPORTANT! Any maintenance other than that
described in this manual must be carried out by your
servicing dealer (retailer).