Hitachi CR 13VA - Manual (Page 17)

English
17
CAUTION:
⅜ Avoid plunge cutting for metallic materials.
This can easily damage the blade.
⅜ Never pull the switch trigger while the tip of
the saw blade tip is pressed against the
material. If you do so, the blade can easily
be damaged when it collides with the
material.
⅜ Make absolutely sure that you cut slowly
while holding the body firmly. If you apply
any unreasonable force to the saw blade
during the cutting operation, the blade can
easily be damaged.
Fig. 27
Fig. 26