Hitachi IP5000 - Manual (Page 3)

mode=code
Simple change the user.ini line to read:
[3]
name=user%M.ini
mode=code
This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for
each phone configured. ‘000000000000’ will represent the MAC address of each specific
unit.
Changing the Configuration:
•
Prior to making any changes, the Administrator’s Guide and the Web Manual should be
consulted.
•
Changes can be made via the web interface or the .ini file can be modified and re-
downloaded to the IP5000, noting the issues above regarding environments with multiple
units.
•
Examples of the more significant portions of the web interface. This is not a
comprehensive web interface tutorial but intended to ensure that all settings required for
compatibility with xIC are selected. If a particular section is not shown here, then the
defaults were used:
Time
•
Enable NTP On Off
•
Date Format
Sun DD Jan,YY
•
Time Format
24 hours
hours
•
Time Zone
GMT-05:00
•
Enable Daylight Saving Time On Off (DST)
•
DST Start Month
4
•
DST Start Day
2
•
DST Start Hour
2
•
DST Start Min
0
•
DST End Month
10
•
DST End Day
29
•
DST End Hour
2
•
DST End Min
0
•
NTP Refresh Interval (60~3153600)
7200
•
NTP Server1
172
.
16
.
1
.
2
•
NTP Server2
192
.
43
.
244
.
18