HP 330 - Manual (Page 34)

1–20
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 1–20 (seq: 34)
This is the black on page 1–20 (seq: 34)
2
Media
Type
Make sure the front-panel Media Type
is set to
Plain . If necessary, press the
Media Type key until the Plain light is
on.
Plain
3 Press Setup .
Setup
4
When the plot has finished, wait until
the
Load Media light comes on and
the plotter ejects the sheet. Remove
the sheet.
Load Media
Setting up your plotter
Task 8: (Optional) Configure the plotter
Localization Note JKCT: Similar to Parrot UG pp 1–25 and 1–26.