HP 15 - Manual (Page 78)

3. Remove the two top screws (1) and two bottom screws (2) from the display bracket and lift the
display brackets (3) to remove them.
4. If it is necessary to replace the display panel cable:
a. Gently remove the cable from the routing clips (1).
b. Detach and release the WLAN module (the WLAN module is attached to the display
enclosure with double-sided tape), and remove the cables (2).
5. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna cables from the clips (1) built into the display enclosure.
b. Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
70 Chapter 4 Removal and replacement procedures