Hoover cleaner - Manual (Page 3)

Remove the toggle bolt (A) from the han-
dle section (B) by turning in a counter-
clockwise direction.
3
1. Assembling cleaner
1-1 1-2
1-4
1-3
Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its
use. Look on the list provided with the product for your local Hoover Factory Service Center or in the Yel-
low Pages under “Vacuum Cleaners - Household” for the nearest Authorized Hoover Warranty Service
Dealer (Depot) or call:
1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center OR
Visit us online at www.hoover.com to find the service outlet nearest you (click on the
“Service” button)
Unpack cleaner from carton, remove all
cardboard and identify parts shown.
1. Handle Section (with toggle bolt)
2. Cleaner body and Powered nozzle
A
G
B
A
B
C
E
F
D
2
The assembled cleaner will look like
the drawing.
A. Cord hook (hook swivels for
quick cord release)
B. ON-OFF switch
C. Dirt cup
D. Removable final filter grill
E. Cleaner body
F. Powered nozzle
G. Dirt cup latch
This cleaner is intended for household
use.
Attach handle
Carton contents Cleaner description
Push handle section (B) onto cleaner
body (C), with holes (D) aligned.
Insert toggle bolt through both holes and
tighten by turning clockwise.
Continued
B
C
D
1
Toggle
bolt