Setup, On-screen displa y – Hitachi 51S715 User Manual
Page 71
71
SETUP
NOTE:
Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Upgrades
Move
SEL
Select
Software Version #: Main
VXX.XX
MMC Software Upgrade
Please insert MMC card
before upgrading.
Upgrade Now
Quick Start Up
Upgrades
Set AV Control
CableCARD Info
Setup
Move
SEL
Select
Setup
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please
complete and return the warranty card.
Insert MMC card, then press the CURSOR PAD
̆
,
̄
to highlight “Upgrade Now”. Press the SELECT button to select and start
upgrading.
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions
from an external home control system.
Set AV Control
Move
SEL
Return
Quick Start Up
Upgrades
Set AV Control
CableCARD Info
Setup
Move
SEL
Select
If you want to use the AV Control
function, please set the RS232C.
Connected RS232C
Setup
Set AV Control
This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting
ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor any changes and prepare the television to quickly
present a picture. A small amount of electricity is used to continually monitor signals when this feature is
selected.
Quick Start Up
Move
SEL
Select
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity.
Off
On
Quick Start Up
Upgrades
Set AV Control
CableCARD Info
Setup
Move
SEL
Select
Setup
Quick Start Up
ON-SCREEN DISPLA
Y
NOTE:
For use with third party home Audio/Video control systems which are commercially available. Please see your dealer
regarding these “non Hitachi” home control systems.
Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.