HP LXR 8000 User Manual
Page 95
39
Set the HP Model 30/FC High Availability Disk Array Operating
Mode
The disk array is shipped from the factory with auto-trespass, which is one of the host mode parameters, turned on.
Auto-trespass must be turned off for the disk array to operate correctly on the Microsoft Windows NT operating system.
1. Turn off Auto-Trespass
a. Make sure that ArrayGUIde has been installed onto the HP NetServers.
b.
From the
Start
bar, select
Programs
.
b.
Click
Windows NT Explorer
.
c. Double-click
Program Files
.
d.
Double-click
CLARiiON
.
e.
Double-click
Agent
.
f.
Double-click the program file SetHM_a.exe.
g.
Using this program to change the host mode parameters causes all disk arrays attached to the HP NetServers to
reboot automatically.
To part 6 of the HP NetServer Installation Guide.