Hotpoint HDA130S - Manual (Page 5)

Cycle Selection Hints
It is important to follow the Loading instructions.
●
NORMAL WASH—For loads of everyday dishes,
●
RINSE & HOLD—For rinsing partial loads which
glasses and cookware with medium soils. Designed will be washed later. not detergent.
to yield high performance on normal soils.
●
WARMER—For warming clean
●
WATER SAVER—For dishes with light soils that dishes and serving plates for the serving of hot food.
have not dried on, or that have extra preparation
before loading. It saves water and energy.
What Happens Each Cycle
●
You’ll hear occasional clicking sounds: During the drying period:
—Soft food disposer shredding action. —The motor stops.
—Drain valve opening to pump water out. —Water vapor comes through the vent by the
—Timer control as cycle progresses.
door latch during drying and when water is
—Detergent cup opening.
being pumped out.
Wash Cycle
Water Use Time
Gallons Minutes
Wash Cycles Cycle Sequence
NORMAL WASH 11.4
WATER SAVER 8.2 76
RINSE & HOLD 10
Drying Options:
DRYING HEAT ON. Available on wash except RINSE & HOLD. Add minutes wash cycle time.
DRYING HEAT OFF. Drying heater is turned off. Dishes dry naturally.