Humminbird 500 SERIES 596C - Manual (Page 61)

53
Select Views
(Advanced)
Select Views allows you to set the available
views to either hidden or visible in the view
rotation. The view will be removed from the view
rotation if it is set to Hidden and will be displayed
in the view rotation if it is set to Visible.
NOTE: See Views for more information.
To Hide or Show a view:
1. Make sure the User Mode is set to Advanced, then highlight Select
Views on the Setup main menu.
2. Press the RIGHT Cursor key to access the Select Views submenu.
3. Press the UP or DOWN Cursor keys to select a View.
4. Press the LEFT or RIGHT Cursor keys to change the status of the view
from Hidden to Visible or vice versa.
Setup Menu Tab