Document Outline

• HP xp7010/xp7030 Series Digital Projector User's Guide
• Contents
  • Safety precautions 6
  • What’s in the box? 7
  • Identifying common features 8
  • Setting up the projector 13
  • Turning the projector on and off 23
  • Making basic adjustments 25
  • Using the remote control 26
  • Showing a computer screen 28
  • Selecting a different source 28
  • Hiding or showing the picture 28
  • Adjusting the picture and sound 29
  • Using the on-screen menu 34
  • Performing routine maintenance 39
  • Upgrading the projector 43
  • Installing the projector 44
  • Connecting to a room controller 47
  • Troubleshooting suggestions 55
  • Testing the projector 60
  • Specifications 61
  • Safety information 64
  • Regulatory information 64
  • Recycling information 67
• Setting Up
  • Safety precautions
  • What’s in the box?
  • Identifying common features
    • Projector at a glance
    • Projector buttons and lights
    • Back panel
    • Remote control
    • Accessories
  • Setting up the projector
    • Positioning the projector
    • Connecting power
    • Connecting a computer
    • Connecting a handheld organizer
    • Connecting a video source
      • Connecting a DVI source
      • Connecting a component-video source with a component-to-VGA cable
      • Connecting an RCA component-video source (certain models only)
      • Connecting an S-video source
      • Connecting a composite-video source
  • Turning the projector on and off
    • Turning the projector on
    • Turning the projector off
    • Moving the projector
  • Making basic adjustments
    • Aiming the projector
    • Adjusting the focus and zoom
  • Using the remote control
• Showing Presentations
  • Showing a computer screen
  • Selecting a different source
  • Hiding or showing the picture
• Adjusting the Projector
  • Adjusting the picture and sound
    • Choosing the best picture mode
    • Adjusting the shape of the picture
    • Adjusting a slanted picture
    • Adjusting the picture for best color
    • Adjusting other picture settings
    • Adjusting the sound settings (certain models only)
    • Adjusting the projector setup
    • Preventing unauthorized use
  • Using the on-screen menu
    • Changing settings using the on-screen menu
    • Changing the default settings
    • Setup menu
    • Picture menu
    • Source menu
    • Help menu
• Maintaining the Projector
  • Performing routine maintenance
    • Getting the projector status
    • Cleaning the projector lens
    • Replacing the lamp module
    • Replacing the battery in the remote control
  • Upgrading the projector
    • Updating the firmware
      • USB method
• Installing Permanently
  • Installing the projector
    • Choosing cables
    • Installing on a table
    • Installing on the ceiling
    • Installing for rear projection
    • Locking the projector
    • Controlling an external accessory
  • Connecting to a room controller
    • Serial connections
    • Examples of room controller commands
    • Room controller commands
• Fixing Problems
  • Troubleshooting suggestions
    • Warning light problems
      • If both red warning lights are blinking:
      • If the red temperature light is on:
      • If the red temperature light is blinking:
      • If the red lamp light is on:
      • If the red lamp light is blinking:
      • If the red lamp light is flickering quickly:
    • Start-up problems
      • If no lights or sounds turn on:
    • Picture problems
      • If a “scanning” or “waiting” message is displayed on a blank screen:
      • If the wrong input source is displayed:
      • If the image is out of focus:
      • If an upside-down or reversed image is displayed:
      • If the image is too small or too large:
      • If the image has slanted sides:
      • If the image is stretched:
      • If the projected colors seem slightly wrong:
      • If the projected colors seem completely wrong:
      • If the picture is not clear (ghost images, smearing, poor quality):
      • If several picture settings seem completely wrong and you cannot fix them:
      • If a scrolling or cut-off image is displayed for a computer connection:
      • If the image is flickering or unstable for a computer connection:
      • If the image disappears from the computer screen:
      • If text or lines from a computer display seem rough or uneven:
    • Sound problems
      • If no sound is coming out of the projector:
    • Interruption problems
      • If the projector stops responding to all controls:
      • If the lamp shuts off during a show:
      • If the lamp burns out or makes a popping sound:
    • Remote control problems
      • If the remote control does not operate:
  • Testing the projector
    • Running the projector diagnostics
• Reference
  • Specifications
  • Safety information
    • Mercury safety
  • Regulatory information
    • U.S.A.
    • Canada
    • Japan
    • Korea
    • International
  • Recycling information
• Index