HONDA 00X31-TE0-6000 - Manual (Page 371)

Also check the combined fuse box in
the under-hood fuse box.
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
, and , or the diagram on
the fuse box lid or the fuse label,
which fuse or fuses control that
component. Check those fuses first,
but check all the fuses before
deciding that a blown fuse is not the
cause. Replace any blown fuses and
check if the device works.
Check each of the large fuses in
the under-hood fuse box by
looking at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
On the under-hood and passenger’s
side interior fuse boxes, remove
the cover from each fuse box.
3.
1.
2.
368 369 370
CONTINUED
Fuses
Checking and Replacing Fuses
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
365
FUSE
BLOWN BLOWN