HONDA 00X31-TE0-6000 - Manual (Page 91)

Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position (A/T vehicles).
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Or, until you hear two more
clicks (after about 10 seconds)
to activate
.
Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
1.
2.
1.
2.
3.
4.
driver’s door unlock
feature.
Unlocks the driver’s door or both doors
when the shift lever is moved into the
Park (P) position (A/T vehicles only).
both doors unlock
feature
Unlocks the driver’s door or both doors
when the ignition switch is moved out of
the ON (II) position.
CONTINUED
To program the Park Unlock mode: To program the Ignition Switch
Unlock mode:
Door Locks
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
85