Honeywell PCR-110 - Manual (Page 3)

1 Unpacking the unit and conditions of use
Before and when unpacking the unit, make a visual inspection to
identify any possible damage which may have occurred during trans-
portation. Please look for loose parts, dents, scratches, etc.
Report any damage immediately to the freight company. (Please see
“Conditions if damage has occurred”.) In other instances, the latest
edition of the “General conditions for the supply of goods and
services” issued by the ZVEI (German Central Association for the
Electrotechnical Industry) shall apply.
Before disposing of the packaging, please check it for loose functional
parts and information leaflets.
So that we can process warranty claims, please give an exact
description of the defect (with a photograph, if appropriate) and state
the model designation of the unit.
Please keep these operating instructions at the place where the
equipment is used.
2 General instructions
Work on the electrical devices and switching equipment may only be
carried out by appropriately qualified personnel. The relevant safety
and environmental regulations must be followed.
FLICA equipment is free from PCBs, PCTs, asbestos, formaldehyde,
cadmium and water-repelling substances.
The design of the equipment has taken into account the Standards
EN 50081-1,2 (emitted interference), EN 50082-1 (immunity to inter-
ference), EN 60335-1 (electrical safety), IEC 695-2-1 to -2-3
(fire resistance, glow-wire test).
Safety tests have been performed in the factory on all equipment in
accordance with EN 60335-1 (DIN VDE 0700 T500).
3 Use and function
3.1 Use for the purpose intended
¼ This controller is designed to control ambient temperatures or
media temperatures in refrigeration or heating systems.
¼ The controller must not be used as a safety cut-out device or excess
temperature limiter.
3