HP DVD100I - Manual (Page 24)

hp dvd-writer hp dvd-writer hp dvd-writer hp dvd-writer dvd100i dvd100i dvd100i dvd100i Technical Support Solutions Guide 10/25/01 Electrical Specifications
24 24 24 24
⇐ ⇐ ⇐ ⇐ ⇒ ⇒ ⇒ ⇒
Electrical Specifications
Power
Table 14 Table 14 Table 14 Table 14 Connectors and Jumper Block
Power Management Power Management Power Management Power Management
The drive is Energy Star compliant.
Power Input Power Input Power Input Power Input
The internal PC power supply for the drive is:
■ 5 VDC with +/-5% tolerance, +12 VDC with +/-10% tolerance
Power Consumption Power Consumption Power Consumption Power Consumption
The amount of power used by this drive is 25 Watts, maximum.
Front Audio Output
The front audio output is an industry-standard stereo mini type.
Ground Tab
The ground tab is an AMP FASTON terminal 61761-2 or its equivalent.
Tray Locking Mechanism
There is a locking mechanism on the tray such that when power is off and the tray is
closed, the tray will be locked in a closed position. This locking mechanism has a
manual override.
Connector Description
DC Power Inlet 4 pin Amphenol
Audio Output 4 pin per MPC-2 spec. (rear of drive)
1V typical RMS output voltage
3.5 mm Headphone Jack (front of drive)
0 to 3.5V RMS output voltage
Signal Connector 40 pin ATA-2 dual row header, shrouded & keyed
Rear Jumper Block ATAPI ID selection (Master, Slave, CSEL)
Product Information Drive Specifications Interfaces Installation and Configuration
Drive Operation Tips and Techniques Software Maintenance
Troubleshooting Warranty and Support Release Notes Discontinued Products