This product enables access to your optical drive from Windows. You can now use
your CDR(W) or DVD recorder for file storage and retrieval as if it were a hard drive or
floppy disk.

Discs must be formatted for HP DLA use.

Refer to the on-line help for configuration and formatting instructions.

HP DLA may not function properly if Auto Insert Notification (AutoRun) is disabled. If
you encounter difficulties with HP DLA, please ensure that the AutoRun feature of
your operating system is enabled.

2. System Requirements

The system requirements for this product include:

■

IBM or 100%-compatible Pentium 133 or higher, at least 32 Megabytes of RAM,
and 10 Megabytes of free disk space

3. Multiple Device Support

If you have more than one supported optical device attached to your system, HP DLA
will only be able to access one device at a time.

4. Upgrading HP DLA

While upgrading HP DLA to a Windows NT or Windows 2000 machine, a message
might display stating that a driver has not been installed.

This does not affect the actual installation. Continue with the installation as normal
and then reboot at the end of the installation process. The correct driver will be
installed.

5. Sharing a HP DLA Drive

If you share a HP DLA drive, you may encounter data transfer issues. Sharing of HP
DLA drives is not supported with this release, and not recommended for reliable data
transfer.

Product Information

Drive Specifications

Interfaces

Installation and Configuration

Discontinued Products