Hotpoint TCD975 - Manual (Page 6)

6
GB
Selecting your language
The Display
Understanding the display
Programme selection and display
The selected programme is shown on the first line of the display when you select the corresponding button, this
message is shown while the programme is running.
Memory: When you select the memory button the Display will show your selected programme with ‘M’ before its name.
ie. M COTTON HIGH HEAT ( see Start and Programmes ).
Dryness levels
During programme selection for an automatic programme that has different dryness levels available ( see
Programmes Table ).
The second line of the display shows the dryness level you require, for each press of the Dryness Level button the next
option from the list below is selected and displayed.
COTTON HIGH HEAT
COTTON LOW HEAT
SYNTHETICS
BED & BATH
EASY IRON
AIRING
DELICATES
WOOL
The first time you turn on your dryer you should select your preferred language from the available list.
To change: the language current selection must flash, on
the first line of the display.
- Press and hold all 3 buttons: Child Lock, Timed Dry and
Dryness Level for 5 seconds.
- Press the Child Lock or the Timed Dry button to scroll up
or down through the list.
- When your required language is flashing on the top line
of the display, pressing the Dryness Level button will
select your choice.
IRON DRY
HANGER DRY
CUPBOARD DRY
Iron Dry: Dries your clothes ready for ironing.
Hanger Dry: Dries your clothes ready for hanging.
Cupboard Dry: Dries your clothes ready for wearing.
The display also shows: one, two or three blocks, depending on your selection.
These are displayed during the programmes progress.