Harbor Freight Tools 9576 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 9576,
94639
wearing a long-sleeve shirt, roll sleeves
up above elbows.
Do not overreach. Keep proper footing
7.
and balance at all times to prevent
tripping, falling, back injury, etcetera.
Industrial applications must follow OSHA
8.
requirements.
Stay alert. Watch what you are doing at
9.
all times. Use common sense. Do not
use this product when you are tired or
distracted from the job at hand.
Check for damaged parts. Before using
10.
this product, carefully check that it
will operate properly and perform its
intended function. Check for damaged
parts and any other conditions that may
affect the operation of this product.
Replace or repair damaged or worn parts
immediately.
Replacement parts and accessories:
11.
when servicing, use only identical
replacement parts. Only use
accessories intended for use with this
product. Approved accessories are
available from harbor freight tools.
Maintain this product with care. Keep
12.
this product clean and dry for better and
safer performance.
For your safety, service and maintenance
13.
should be performed regularly by a
qualified technician.
Use the right tool for the job. Do
14.
not attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it was
intended. Do not modify this tool, and do
not use this tool for a purpose for which it
was not intended.
The warnings, precautions, and 15.
instructions discussed in this manual
cannot cover all possible conditions and
situations that may occur. The operator
must understand that common sense
and caution are factors, which cannot
be built into this product, but must be
supplied by the operator.
sPecIFIc PrODUcT WarnIngs
anD PrecaUTIOns
TO AVOID SERIOUS PERSONAL 1.
INJURY AND PROPERTY DAMAGE,
DO nOT aTTeMPT TO Use ThIs
PrODUcT TO PUMP FLaMMaBLe,
eXPLOsIVe, Or cOrrOsIVe
LIQUIDs.
Use OnLY a
2. 12 VOLT Dc
eLecTrIcaL sYsTeM TO POWer
ThIs PUMP.
Maintain a safe working environment.
3.
Keep the work area well lit. Make
sure there is adequate surrounding
workspace. Keep the work area free
of obstructions, sawdust, grease, oil,
standing water, trash, and other debris.
Avoid electrical shock. Use caution
4.
when connecting the utility pump to
a 12 volt, DC electrical system. Use
caution when working with uninsulated
conductors or bus bars. Prevent body
contact with grounded surfaces. Avoid
stepping in standing water or other
liquids.
This utility pump is designed for
5.
intermittent use only. Do not use the
utility pump over excessive lengths of
time, as premature wearing will result.
Secure the discharge hose (not included)
6.
before starting the utility pump. An
unsecured hose may whip, causing
personal injury and/or property damage.