Harbor Freight Tools 9576 User Manual

Page 4

Advertising
background image

Page 4

For technical questions, please call 1-800-444-3353.

SKU 9576,

94639

Do not allow the utility pump to run

7.

dry. Fill the pump (23) chamber with

liquid before operation. Failing to do so

may damage the seal ring (22), which

depends on the liquid for its lubrication.
In cold weather, when the utility pump

8.

is not in use, protect the interior of the

pump from freezing by draining the

liquid and pumping a permanent type

automobile antifreeze containing a rust

inhibitor through the system. A 50%

mixture with water is recommended. Be

sure to thoroughly flush the system with

a neutralizing liquid prior to reuse of the

unit.
If used on a boat, read and understand

9.

all instructions and safety precautions as

outlined in the manufacturer’s manual for

the boat on which the utility pump will be

used.
Lead-acid batteries generate

10.

hydrogen gas during normal

operation. hydrogen gas is:

explosive and highly flammable.
If connecting the utility pump temporarily

11.

to a lead-acid battery, wear ANSI

approved, safety impact eye goggles.
Avoid contact with battery acid. If

12.

splashed, immediately wash affected

area with clean water. Continue washing

area until medical help is available.
If the utility pump is used on a boat, turn

13.

off the boat ignition before making power

cord (1) connections.
If used on a boat, always connect the

14.

red

power cord (1) on the utility pump to the

positive (+) side of the boat’s 12 volt DC

electrical system.
Connect the

15.

black power cord (1) on the

utility pump to the negative (--) side of

the boat’s 12 volt electrical system.

When connecting the power cords (1) to

16.

the boat’s 12 volt DC electrical system,

connect the red power cord first.

Then,

connect the black power cord. When

disconnecting the power cords from

the electrical system, disconnect

the black power cord first. Then,

disconnect the red power cord.
Turn the boat’s ignition switch to its “off”

17.

position and disconnect the utility pump

from the boat’s 12 volt DC electrical

system before performing any inspection,

adjustments, maintenance, or cleaning

procedures on the pump.
DO NOT SUbMERGE ThE UTILITY

18.

PUMP IN wATER.
People with pacemakers should consult

19.

their physician(s) before using this

product. Electromagnetic fields in close

proximity to a heart pacemaker could

cause interference to or failure of the

pacemaker.

Advertising
This manual is related to the following products: