HoMedics BPW-101 - Manual (Page 7)

12 11
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Data Error: Remove and reload the batteries.
If any of the following letters and numbers appear in the
area that diastolic pressure should be displayed, an error
has occurred with your reading. See Troubleshooting
section of this manual for more information.
DISPLAY EXPLANATIONS
Date/Time
Indicator
Diastolic
Pressure
User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Symbol: Shows the memory reading number
Memory Average: Displays average of last
3 readings
WHO Health Indicator: Compares blood pressure
against guidelines set by the World Health
Organization. See page 24 for more information.
Display Symbols:
Pulse Rate
Systolic
Pressure
BPW-101IB_ENGSP.qxd 10/24/05 11:14 AM Page 11