haier HVC15A - Manual (Page 9)

8
English
WINE CELLAR INSTALLATIONS
Install Limitations
• Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc. Your
wine cellar was not designed to operate in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cellar on a hard even surface away from direct sunlight or heat
source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be cor-
rected with the leveling legs located on the front and rear bottom corners of the wine cellar.
Dimensions
• Built-in wine coolers need to be ventilated from the front. This feature allows the unit to be built in an
enclosed area. The bottom front grille should be clear of all obstructions. This is absolutely necessary
for the air to circulate and for the unit to operate efficiently. The dimensions for installation are as fol-
lows. (W x D x H)
Unit Dimensions: 14 7/8” x 23 1/8” x 34 1/4”
Built-In Dimensions: 15” x 24” x 34 1/2”
20-5/8”
14-7/8”
34-1/4”
23-1/8”