Hustler Turf 929125 - Manual (Page 13)

110907 01/09 3-3
Battery Installation
NOTES:
1. When performing service on mower, disconnect battery ground cable
and black wire of harness and do not reconnect to battery until engine is
ready to be started. See Owners Manual.
2. Battery is not installed in export models. Hardware used for fastening
battery cables to battery to be installed and tightened to battery cables.
Battery clamp strap and associated hardware to be installed as shown
with capscrews (Items 1) bottomed out on threads of clip nuts (Items
11).
ITEM
NO.
SERVICE
PART NO.
MFG.
PART NO.
QTY DESCRIPTION
1 601930 601930 2 CS .250-20 X 6.50 HX G5
2 768515 768515 2 FW .281 X .625 X .051/.080H
3 348417 348417 1 BATTERY CLAMP STRAP
4 601062 601062 1 BATTERY CABLE, POS.
5 601841 601841 1 BATTERY CABLE, NEGATIVE
6 024927 024927 2 NT .250-20 HX GR.5 ZNYC
7 029868 029868 4 LW .250 INT-EXT TOOTH ZN
8 055939 055939 2 CS .250-20 X .750 HX G5 ZN
9 771428 771428 1 BATTERY CBL BOOT-RED
10 740696 740696 1 BATTERY
11 601982 601982 2 CN .250-20X.150 MAX THK
12 794644 794644 1 GM 1.50 X 2.12 X 1.75
1 2