Hitachi 3000 - Manual (Page 109)

- 7-7 -
Chapter 7
Maintenance
Ping
3 If the 2nd Proxy server is not configured, the message as shown in the diagram on the
right is displayed.
Default Gateway
1 From the Ping test menu
Select “4. Gateway” using the keys of the key,
then confirm with the key.
2 Execute a ping to the default gateway.
recv: Displays the ping response.
The following numbers indicate the response time (sec).
time out: Indicates there was no response to the ping.
To end ping, press the key or key.
TFTP Server
1 From the Ping test menu
Select “5. TFTP Server” using the keys of the key,
then confirm with the key.
2
Execute a ping to the TFTP server.
recv: Displays the ping response.
The following numbers indicate the response time (sec).
time out: Indicates there was no response to the ping.
To end ping, press the
key or key.