Password/lock mode selection, Chapter 6 – Hitachi 3000 User Manual
Page 85
- 6-6 -
Chapter 6
Other settings
Password/lock mode selection
Changing the keylock password and configuring settings for keylock operations.
You can prevent unauthorized access by a third party by using a password to disable button operations on this product.
1
To change the keylock password, from the setting menu, select "2. Phone lock" using
the keys of the
key,
then press the
key.
2
From the phone lock menu select “1. User Pwd” using the keys of the
key,
then press the
key.
3
When you select "1. Password", the system asks for the current password.
Please enter the correct password.
The default value for the keylock password is "0000". If you input the wrong
password, the message "input the correct password" is displayed asking you
to input the correct password again.
If you forget the password, you may not be able to set or release the keylock.
(This depends on the lock mode setting.)
4
When you input the correct password, the system asks you to input the new password.
The password is a number up to four digits long.