Harman-Kardon HA160-0004-A - Manual (Page 59)

T
roubleshooting Guide
55
Signature 2.0
At the Advanced Settings menu (Figure
OSD-10), press the ¤ Menu Control button i
twice until SYSTEM RESET > is highlighted.
Press the › Menu Control button i again.
This will bring up the System Reset Menu
(Figure OSD-40). If you wish to exit at this point, press
the Menu button j. To proceed with the reset, press the
¤ Menu Control button i to move the highlighted
area to the Yes > line, and then press the
› Menu Control button i.
Figure OSD-40
The next screen (Figure OSD-41) instructs you to proceed
by pressing and HOLDING the Store button until
the reset is complete.
Figure OSD-41
P r e s s a n d h o l d S T O R E
t o a c c o m p l i s h R E S E T
S y s t e m R e s e t M e n u
N O !
Y e s >
! ! ! W A R N I N G ! ! !
A L L S E T T I N G S W I L L B E
L O S T ! !
A R E Y O U S U R E ?
Follow that instruction by holding the Store button
until the Reset Completed message appears
briefly on screen (Figure OSD-42) and the front panel
Information Display . This is your indication that the
reset has been accomplished, and you may release the
Store button. The system will automatically return to
the Advanced Settings menu.
Figure OSD-42
After a reset the system is returned to the original factory
default settings as shown in Appendix A, and the micro-
processor system is re-initialized. Press the Menu button
j twice to return to normal operation, but remember
that you will have to re-enter any settings previously estab-
lished that differ from the factory presets.
If a reset does not solve the system problem, consult an
authorized Harman Kardon service depot.
R e s e t C o m p l e t e d