Horizon Fitness P8000 - Manual (Page 8)

8
ASSEMBLY STEP 1
A Place the front foot in position at the
front of the cycle, with the transport
wheels facing forward, aligning the
two holes in the foot with the mating
holes in the frame bracket.
B Insert the two screws (Z01) through
the frame bracket and front foot.
Using the #5 Allen Wrench (Z31) to
tighten the screws securely.
C Place the rear foot in position at the
rear of the cycle, aligning the two holes
in the foot with the mating holes in the
frame bracket.
D Insert the two screws (Z01) through the
frame bracket and front foot. Using the
#5 Allen Wrench (Z31) to tighten the
screws securely.
Z01
Z01
Z01
Z01