Horizon Fitness P8000 - Manual (Page 9)

9
ASSEMBLY STEP 2
G11
G10
A Install the pedals on the pedal cranks by using
the Open Wrench (Z32). The closed end of the
pedal cage must point forward, toward the front
of the cycle.
NOTE: Be careful to align the threads correctly
to avoid damage. A little grease on the threads
should help the pedals to screw in easily
and correctly. Turn the LEfT pedal spindle
COUNTERCLOCkwISE when threading into
the crank arm, and turn the right pedal spindle
clockwise when threading into the crank arm.
C Place the handlebar on the handlebar
stem. Position handlebar bracket beneath
the handlebar stem and insert the quick
release lever set (G10, G11) through the
bottom bracket and into the handlebar.
Turn COUNTERCLOCkwISE to tighten.
D To adjust the position of the handlebar,
loosen quick release lever (G10) and
slide to the desired location.