Hollywood VR-652 - Manual (Page 29)

ENGLISH
29
Continued
To add a track to the track list
• You can insert a track between the specific tracks.
Example) When you insert track 3 between track 1 and track 11 which are programmed first and second.
• Then the selected track is programmed.
• Then the tracks are played back in the programmed
order.
• After all the programmed tracks have been played back, it
enters the stop mode and the program mode is canceled
without clearing the programmed tracks. In this case, if
the PROGRAM button is pressed, the programmed tracks
are displayed on the program menu.
3.
Press the CURSOR / buttons to select the program menu and press the CURSOR / buttons to
select ADD, then press the ENTER button.
5.
To start programmed playback, press the CURSOR / buttons to select the program menu and press the
CURSOR / buttons to select PLAY, then press the ENTER button.
1.
When displaying the program menu, press the CURSOR / buttons to select the track menu, then press
the CURSOR / buttons to select track 3.
2.
Press the CURSOR / buttons to select the track list, then press the CURSOR / buttons to select
track 1.
4.
Repeat the above steps 2 and 3 until the desired tracks are programmed.