Hollywood VR-652 - Manual (Page 8)

8
Y Pb Pr
4.
CONNECTING TV
• There are three types of MONITOR OUTs
(COMPONENT, S-VIDEO, ((composite) VIDEO).
Connect them to the corresponding video jacks of
your TV according to their capability.
• For your reference, the excellence in picture quality
is as follows :
"COMPONENT" > "S-VIDEO" > (composite)
"VIDEO").
• When making COMPONENT VIDEO connections,
connect "Y" to "Y", "P b " to "P b "(or "B-Y", "C B ") and
"P r " to "P r "(or "R-Y", "C R ").
• Depending on the type of the COMPONENT
VIDEO INs of your TV, be sure to set the SCAN
TYPE correctly. (Refer to "When selecting the
SCAN TYPE" on page 39.)
Notes :
• You don't need to make all kinds of video
connections between this unit and your TV.
• When you set the resolution to the mode other than
INTERLACED, the S-VIDEO and the (composite)
VIDEO MONITOR OUTs of this unit cannot output
the video signal, meaning the picture will not be
shown. (For details, refer to "When selecting the
SCAN TYPE" on page 39.)
• If the resolution of the video signals which are
output from the COMPONENT MONITOR OUTs
and your TV are not matched, the picture is not
clear, natural or displayed. In this case, change the
setting of the resolution to suit that of your TV.
• Do not connect the unit to the TV through a VCR.
Otherwise the picture may be disturbed due to the
copy protection function.
• CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
"STANDARD DEFINITION" OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
ENGLISH