HP Photosmart 140 series - Manual (Page 47)

5
basics guide 43
troubleshooting
Your HP Photosmart printer is designed to be reliable and easy to use. This
chapter answers frequently asked questions and contains information about the
following topics:
•
hardware problems on page 43
• printing problems on page 44
• error messages on page 48
For troubleshooting information about software installation, see the reference
guide that came with your printer. For advanced troubleshooting information, see
the HP Photosmart Printer Help. For information about viewing the printer help,
see view the hp photosmart printer help on page 2.
Note: In the presence of high electromagnetic fields, printed documents
and photos may be slightly distorted.
Note: HP recommends using a USB cable less than 10 feet (3 meters) in
length to minimize injected noise due to potential high electromagnetic
fields.
hardware problems
Before contacting HP support, read this section for troubleshooting tips or go to
the online support services at www.hp.com/support.
Problem Possible cause Solution
The On/Attention light is
blinking green but the printer is
not printing.
The printer is processing
information.
Wait a moment for the printer
to finish processing the
information.
The On/Attention light is
blinking red.
The printer requires attention. Try the following:
1 Check the printer’s LCD
screen and the computer
monitor for instructions.
2 If this does not work and
you have a digital camera
connected to the printer,
check the camera’s LCD for
instructions.
3 If this does not work, turn off
the printer. Unplug the
printer’s power cord, wait
about 10 seconds, then
plug it in again. Turn on the
printer.