HONDA HRT216PDA - Manual (Page 15)

Engine Oil Level
Check the engine oil level with the
engine stopped and the mower on
a level surface.
1. Remove the oil filler cap, and
wipe the dipstick clean.
2. Insert and remove the dipstick
without screwing it into the
filler neck. Check the oil level
shown on the dipstick.
3. If the oil level is low, add the
recommended oil (see page 35)
to reach the upper limit mark on
the dipstick. Do not overfill.
4. After checking the engine oil
level, screw in the filler
cap/dipstick securely.
FILLER CAP/DIPSTICK
FILLER CAP/
DIPSTICK
UPPER LIMIT
LOWER LIMIT
DO NOT SCREW
DIPSTICK IN TO CHECK
OIL LEVEL
BEFORE OPERATION
13