HONDA HRT216PDA - Manual (Page 22)

Drive Clutch Lever (SDA, TDA)
Push the drive clutch lever forward
and hold it against the handlebar to
propel the mower forward.
Release the drive clutch lever to
stop the mower’s forward
movement.
Always release the drive clutch
lever before starting the engine. If
the drive clutch is engaged, the
mower will move forward when you
operate the starter.
Operate the drive clutch lever with a quick and complete motion, so
the drive clutch is either fully engaged or released. Hold the drive
clutch lever against the handlebar during self-propelled mowing. This
will help to extend the service life of the clutch mechanism.
Shift Lever (TDA)
Use the shift lever to adjust the forward
speed of the mower. Do not use the
throttle lever; the throttle lever must be
kept in the FAST position for the best
mowing performance.
You may move the shift lever anytime;
however, if the mower is pulling hard,
release the drive clutch lever between
shifts for smooth operation.
1st and 2nd gears are recommended
for maximum mowing performance. 3rd
gear should be used to transport the
mower.
SPE
ED
3
2
1
1st GEAR
2nd GEAR
3rd GEAR
DRIVE CLUTCH LEVER (SDA, TDA)
OPERATION
20