Warranty – FOCUS Enhancements MR-HD100 User Manual
Page 209
MR-HD100 Media Recorder
189
Operation
When operating the MR-HD100 at 12V rather than 14.4V, the
power consumed remains the same, but the current draw
increases by a factor of 1.2 (14.4/12.0).
The Linksys dongle uses approximately 1.35W. This represents
about 30% of the power budget when not charging the batteries.
When charging the batteries, the MR-HD100 applies as much
power as possible to the battery, up to a limit of about 1A
charging current. However, the overall power system limits the
total amount of current consumed to about 0.6 A maximum
based on the 15V input adapter.
The result is that when a big load is added, such as a discharged
battery and the dongle, the MR-HD100 automatically reduces
the amount of the charging current so that the total current
through the adapter never exceeds approximately 0.6 Amps.
Warranty
• MR-HD100, one year, limited.
Battery Installed - partially discharged, full charging current
Volt- in
No Dongle
With Linksys Dongle
Notes
14.4 V
NA
0.608A (8.75W)
Record Mode-LCD/
Backlight at max
14.4 V
0.525A (7.6W)
0.575A (8.25W)
record for 1 hr.,
internal T=56 deg.C