Fluke 396 - Manual (Page 7)

Waveform Generators
Supplied Accessories
5
•
The proper power cord is connected to the unit. Do not use a two-
conductor extension cord or a three-prong to two-prong adapter.
This will defeat the protective feature of the third conductor in the
power cord.
•
The instrument is configured to operate on the voltage at the power
source. See Installation Section.
•
The proper fuse is in place for the power source to operate. The
correct fuse to use is: Littelfuse, Cat.No. 218500; T, 250VAC, 0.5A.
•
All other devices connected to or in proximity to this instrument are
properly grounded or connected to the protective third-wire earth
ground.
Supplied Accessories
The Instrument is supplied with this Getting Started Manual, a disk containing the
Getting Started Manual and the Users Manual, and a disk containing a Windows  version
of the ArbExplorer software.
Specifications
The Instrument specifications are listed in Appendix A of the Users Manual. These
specifications are the performance standards or limits against which the instrument is
tested.