Fluke Computer Accessories - Manual (Page 39)

User’s Guide – version 3.5 NetFlow Tracker
39
0023 Next Hops
0024 Source Address Dissemination
0025 Destination Address Popularity
0026 Recognised Applications
0027 Traffic Classes
0028 Identified Applications
0029 Bi-directional Address Pairs
0030 Bi-directional Conversations
0031 Bi-directional AS Pairs
0032 Bi-directional Network Pairs
0033 Total
0034 VPNs
0035 Addresses
0036 Endpoints
0037 Networks
0038 Ass
0039 Sessions
0040 Bi-directional Sessions
0041 Interface Pairs
_flows Full flows
id – specifies the long-term report to open. It is possible to enable several standard
long-term reports in Report Settings ; the IDs for these reports are given below. The id
for a custom report is available in Report Settings . This parameter should not be used
in conjunction with templid or cid.
0000 Source Addresses per inbound interface
0001 Source Addresses per outbound interface
0002 Destination Addresses per inbound interface
0003 Destination Addresses per outbound interface
0004 Recognised Applications per inbound interface
0005 Recognised Applications per outbound interface
0100 Source Addresses per source device
0101 Destination Addresses per source device
0102 Recognised Applications per source device
<id> A custom long-term report ID
cid – specifies the executive report to open. The ID for an executive report is available
in Report Settings . This parameter should not be used in conjunction with templid or
id.
<id> An executive report ID