Meridian Audio 501 - Manual (Page 16)

Using the Control Unit
12
Adjusting the volume
To decrease the volume
● Press V (front panel), or V (remote control).
For example, the display will show:
CD55
To mute the sound
● Press Mute.
The display will show:
Mute
To restore the sound
● Press Mute again.
Alternatively the sound will be restored if you adjust the volume.
The 501/501V Control Unit allows you to adjust the volume in
precise steps of 1dB, where 9dB is equivalent to doubling the
loudness.
The current volume setting is displayed in dB on the front panel
display, and can be varied in the range 1 – 99dB. When you first
switch on the control unit the volume is set to 65, which is
similar to the midway position of the rotary volume control on a
conventional preamplifier.
To increase the volume
● Press
A (front panel), or A (remote control).
For example, the display will show:
CD75