Meridian Audio 501 - Manual (Page 27)

Customising the Control Unit
23
When the control unit is set to one of the standard settings the
twelve source selection keys on the remote control select the
standard labels and inputs, as shown in the table on page 21.
If the configuration you want is not catered for by one of the
standard settings, you can configure each source individually.
The 501/501V Control Unit provides 12 sources corresponding
to the 12 source selection keys on the remote control:
CD, Radio, LP, TV, Tape1, Tape2, CDR, Cable, Text, VCR1,
VCR2, and LD.
For each source you can configure:
❍ The label used for it on the front panel display, from 45
alternative labels.
❍ The audio input it selects.
❍ The comms type and address, to identify other Meridian 500
Series equipment.
❍ The video and S-VHS inputs it selects (501V only).
The procedure for doing this is as follows.
Configuring the sources