Meridian Audio 501 - Manual (Page 31)

Customising the Control Unit
27
To change the video input for a
source
● Display the source you want to configure, together with the
current video input, as described in the previous sections.
For example, to configure
the CD video input choose:
CDLV
● Press V or A to choose the video input.
For example, if you always want the
TV picture when you select CD set it to:
CDV5
To set up a source for simultaneous
broadcasts
● Choose a source you are not already using.
● Assign a suitable label to the source; SB is suggested.
● Configure the audio input to A3 (Radio).
● Configure the video input to V5 (TV).
When you select the source you have configured you will get
radio sound and a TV picture, as required for simultaneous
broadcasts.
To set up a system with two CD
players
● Configure the source you are going to use for the first CD
player.
For example: Source CD, Label C1, Audio input A2, Comms
type 1C, Address 1A.
● Configure the source you are going to use for a second CD
player, with a different address.
For example: Source CDR, Label C2. Audio input A3, Comms
type 1C, Address 2A.
The remote control will now automatically control whichever of
the CD players you have selected with the CD or CDR source
keys.