Severe duty equipment – FORD 2002 Crown Victoria User Manual

Page 4

Advertising
background image

POWERTRAIN OVERSPEED PROTECTION

The powertrain control module (PCM) includes logic to electronically
prevent powertrain overspeed in any transmission selector position.

TRANSMISSION

The police vehicle has a unique high-performance powertrain including
transmission and an aluminum driveshaft, which is designed for
maximum vehicle performance. Due to the nature of this powertrain,
some powertrain noise may be present.

Driving in the overdrive cancel mode for prolonged periods at high speeds
will deteriorate performance and may cause extensive engine damage.

Crown Victoria police vehicles are designed to operate in the
(Overdrive) gear selector position while in pursuit. Optimum performance
will be obtained in

(Overdrive). Operation in the overdrive cancel

mode should only be used in situations noted in the “Owner Guide.”

Under no circumstances should the aluminum driveshaft be
replaced with a steel driveshaft. Doing so will adversely affect

vehicle operation which could lead to personal injury.

ELECTRICAL

Battery-Police

The Motorcraft maintenance-free battery normally does not require
additional water during its life. However, for severe service usage or in
high temperature climates, the electrolyte level should be checked at
least every five months or 8 000 km (5 000 miles). If the electrolyte level
is below the level indicator in any cell, add enough pure water to bring
the level up to the indicator. Never add electrolyte (’battery acid”) to the
battery as this could shorten battery life.

HEAVY-DUTY FRAME

Extra reinforcements in the frame on the police vehicle are designed to
strengthen structural members so that they can withstand severe duty use.

Heavy-duty suspension-Police

This option includes heavy-duty components that contribute to the
vehicle’s stability and road handling capability under extremes of
operation. The police vehicle has a heavy duty steering gear, extra
control shock absorbers and heavy-duty front and rear stabilizer bars.

Severe duty equipment

4

Advertising