Foster Induction Hobs 7372 241 - Manual (Page 12)

29
Power management for a
Limited Power Cooktop
(ECO)
The sequence to set a new Cooktop Power Limit is:
▪ During the first 30 seconds after plugging the appliance
▪ The Touch has to be unlocked and all Heaters Off
▪ Push at the same time (A+,A-,D-,D+) keys
▪ Once this is done, a beep sounds and “Po” Characters will be in the timer
display and the “actual Cooktop Power Limit” will be in the display 1 and in the
display 4.
For selecting a new Power Limit:
▪ With any Heater (+ or -) key, the Power Limit is increased/decreased. The
selectable powers are: 2800 W, 3500 W, 6000 W or 7200W.
The sequence to finish recording the new Cooktop Power Limit is :
▪ Push at the same time (A+,A-,D-,D+) keys.
▪ Once this is done, new Cooktop Power Limit is recorded and there is a system
reset.
To finish without recording changes:
▪ If during 60 seconds there is no action, changes are not recorded and there is
a system reset
Power management for a
Limited Power Cooktop
(ECO)
For reduced power cooktops, each time the user tries to increase the power, the total
power level of the cooktop is calculated. If this total power level is greater than the
cooktop power limit, the power increase is not allowed. An error beep sounds and
the heater display shows the actual power level and an ‘r’ blinking.
Induction
plate
1 2 3 4
Ø (mm) 210 145 210 145
Level Power (W)
0 0 0 0 0
1 100 75 100 75
2 200 150 200 150
3 300 300 300 300
4 500 400 500 400
5 700 500 700 500
6 900 600 900 600
7 1100 800 1100 800
8 1300 1000 1300 1000
9 1500 1200 1500 1200
P 2000 1600 2000 1600