Solutions to common dishwashing problems – FRIGIDAIRE 950 Series User Manual

Page 14

Advertising
background image

14

Solutions to Common Dishwashing Problems

(continued)

Vapor at Vent

• Water vapor escapes from the vent during

the final rinse and the drying part of cycle.
This is normal.

Dishwasher Won't Run

• Check to see if circuit breaker is tripped or if

a fuse is blown.

• Make sure water supply is turned on.
• Check to see if cycle is set correctly. (See

Operating Instructions.)

• Is dishwasher set for delay start option?
• Make sure door is closed and latched.

Dishwasher Does Not Drain Properly

• If unit is hooked up to a food waste

disposer, make sure the disposer is empty.

• Check to see if the knockout plug has been

removed from inside the food waste
disposer inlet.

• Check to see if drain hose is kinked.
• Make sure cycle is complete, not in a

pause.

Cycle Takes a Long Time

• Is cycle in a water heating delay?
• Has the delay start option been selected?
• Has the sanitize option been selected?

Dishwasher Won't Fill

• Is water supply turned on?
• Does overfill protector move up and down

freely? (See Overfill Protector section.)

Dishwasher Has an Odor

• Soiled dishes left in dishwasher too long

can create an odor. Rinse dishes if not
running dishwasher at once.

• There will be a "new" smell when first

installed. This is normal.

• Check to see if unit is draining properly.

(See Dishwasher Does Not Drain Properly.)

Etching

• Using too much detergent in soft or

softened water causes this film that cannot
be removed.

• Adjust the amount of detergent based on

the water hardness. (Check Detergent
Chart.)

• Lower the water temperature.
• Use the no heat dry option.

Detergent Left in Cups

• Detergent may be old. Discard and use

fresh detergent.

• Be sure water action can reach the

dispenser.

• Check to see if cycle has been completed.
• Make sure items do not prevent the

detergent dispenser from opening.

Dishwasher Leaks

• Use only fresh detergent designed for

automatic dishwashers. Measure detergent
carefully. Try a different brand.

• Spilled rinse aid can cause foam and lead

to overflowing. Wipe up any spills with a
damp cloth.

• Check to see that dishwasher is level. (See

Installation Instructions.)

Normal Sounds You Will Hear

• Normal sounds include water fill, water

circulation and motor sounds.

• There is a noticeable change in sound

when the wash action switches between the
lower and middle spray arm. This is normal
since each spray arm has its own sound.

• It is normal for dishwasher to pause (no

sound) when the wash action is switching
between the lower and middle spray arms.

Water in Bottom of Tub

• Water left in bottom of tub after cycle is

complete is not normal. If water remains in
the bottom of the tub, dishwasher may not
be draining properly. (See Dishwasher Does
Not Drain Properly.)

Advertising