Setting destination, Set point as destination, Shrink display range or scale – Furuno GP-1610C User Manual
Page 8: 2press the goto key. 1 press the zoom out key, Press until position for destination appears, Destination point
8
Setting Destination
When you set a destination, this unit computes the range, bearing and course to the destina-
tion. To display your destination on the screen select a small display range or scale. To set as
destination a point which is 20 nm from your harbor do the following:
CSE 180.0
°
SPD 0.0kt 2D
DEP 110 m TMP - - .-
°
C 14:40
POS 34
°
26.345’N 135
°
41.232’E
Press until position
for destination
appears.
CSE 180.0
°
SPD 0.0 kt 2D
DEP 110 m TMP - - .-
°
C 14:53
POS 34
°
26.345’N 135
°
41.232’E
SELECT GOTO MODE
Set point as
destination.
WPT List
EVENT List
ROUTE List
Cursor/Route plan
Shrink display
range or scale.
If "Cursor/Route plan"
is not in reverse video,
press
▼
to do so.
ENT: Sel CLR: Release
ESC: Cancel
2
Press the GOTO key.
1
Press the ZOOM OUT key.
Destination
point
MENU
ESC
DISP
SEL 1
EVENT
MOB 6
WPT
2
GOTO
7
MARK
3
PLTR
8
ZOOM
OUT 9
CNTR
5
CLR
TONE
POWER
ZOOM
IN 4
CURS
0
NU/CU
ENT
2
1