Foster Induction Teppan 7325 440 - Manual (Page 6)

18
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically
when the electronic circuit is cooled enough.
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Starting-up
 Start-up/ switch off the hob :
Action Control panel Display
To start Press key [ 0/I ] [ 0 ]
To stop Press key [ 0/I ] nothing or [ H ]
 Start-up/ switch off the heating zone :
To turn on the hob press first the [ 0/I ] key, then the desired heating zone press [ + ]:
Action
Control panel Display
Increase power Press key [ + ] [ 4 ] to [ 9 ]
Decrease power Press key [ - ] [ 9 ] to [ 1 ]
Stop Press simultaneous [ 0 ] or [ H ]
[ + ] and [ - ]
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched without danger.As far as
the residual heat indicator is on light, don’t touch the heating zone and don’t put any heat
sensitive object on them. There are risks of burn and fire.