Initial setup – FOCUS Enhancements MANL102306 User Manual
Page 102
FS100: Using with a Computer
84
FS100 Portable DTE Recorder
To move video files from the FS100 to a computer:
•
Connect the FS100’s
Computer I/O
1394 port directly to a
computer with an active OHCI compliant IEEE1394
FireWire port and the necessary FireWire disk drive drivers.
•
Use the FS100 HDD Bypass mode, refer below for more
information.
The FS100 is compatible with any computer system that can read
FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac
OS9/OS10.
Initial Setup
Step 1:
Connect the FS100 through its
COMPUTER I/O
1394 port to the
computer system using a standard 6pin to 6pin FireWire cable.
Step 2:
Enter HDD mode and enable DD Drive.
This step is required before mounting the FS100 to a computer.
• On the FS100 go to the HDD screen.
• Select DD Drive and Right arrow to Connect screen.
• Press Enable function button.
Refer to the section, “Format Screen” on page 43
Step 3:
Connect the FS100 through its
COMPUTER I/O
1394 port to the
computer system using a standard 6pin to 6pin FireWire cable.
Step 4:
Connect power to the drive if necessary.
Step 5:
Consult the computer’s documentation for more information.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for
more compatibility information.