Record and playback with the fs­100, Power on the fs­100 – FOCUS Enhancements MANL102306 User Manual

Page 40

Advertising
background image

Quickstart 

22

FS­100 Portable DTE Recorder 

Record and Playback with the FS­100 

Before using the FS­100, set up the unit as outlined in the following 
sections: 

Power On the FS­100 .......................................................... 22 

Select HDD Recorder Mode ................................................ 23 

Select a DV File Format  ...................................................... 24 

Set Time and Date  .............................................................. 25 

Record With the FS­100 ...................................................... 27 

Manual Recording  ............................................................... 29 

Syncro Slave  ....................................................................... 30 

Tapeless .............................................................................. 31 

Playback on the FS­100  ...................................................... 32 

The values set in these procedures are fixed and persist through 
power cycles. To change them, repeat the steps outlined above. 

Power On the FS­100 

Step 1: 

Press the 

Power ON 

button for two seconds and release it. 

Power ON 

(Reset) 

OFF (STOP) 

To power OFF, 
hold down for 3­5 seconds. 

Navigation 
Buttons 

Transport 

Buttons 

Play

Advertising
This manual is related to the following products: