Falcon NAVI-B - Manual (Page 14)

NAVI-B VERSION 1.01
bottom right-hand corner of the PC screen is blue-red, you will need to
activate Bluetooth™. Click on the icon, and a pop-up menu will appear
in the display. Select Enable Bluetooth™ Ratio. The colour of the
Bluetooth™ icon will be changed from blue-red to blue-white,
signifying that it is turned on. As shown in figures below:
► ►
4. Click Start button, point to Settings, Control Panel and click the
Bluetooth™ configuration, a screen will appear in the display. Select
the Hardware page and check if your USB Bluetooth™ device is found
and it works properly, as shown below.
5. Close appearing screen. Search for the FALCOM NAVI-B. Right
mouse click the Bluetooth™ icon on the bottom right-hand corner of the
PC screen. On the next pop-up that appears, select Explore My
Bluetooth™ Places item.
Double-click on the marked icon to find the Bluetooth™ devices in the
Bluetooth™ neighbourhood.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 14