Falcon NAVI-B - Manual (Page 17)

NAVI-B VERSION 1.01
(i) Before running the software, make sure that your PC is
recognizing the NAVI-B properly. In order to receive the valid
positions for the current location of the device, please place it so
that the receiver can have clear view to the sky.
On the activated Data Source Setup window, select the COM
(e.g. COM9) for SiRFdemo program and set the baud rate to 4800
bps. See figure below:
(ii) Click the icon on toolbar by the up-down button (marked button
in figure below) the program will automatically detect the
selected COM port and starts evaluating.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 17